HVAC Maintenance Program by Greater Comfort

Not only are you keeping your family safe and saving money when we make sure your system is running as efficiently as possible, we will check and record the following:

Check evaporator fan motor amp draws

Verify proper manifold gas pressure

Check induced draft motor amp draw

Verify all safety’s

Clean flame rod (if applicable)

Check heat exchanger

Inspect flue and fresh air make–up

Inspect contractors

Electric resistance heating elements

Disconnects & wiring

Tightening all electrical connections

Verify proper thermostat operation & program

So Do I Really Need To Call my HVAC?

Again, if you want to make a small investment for the life of your HVAC system and to help ensure you don’t have an emergency situation when the cold temperatures hit, the right thing to do is to set up your maintenance with a qualified and trusted HVAC expert.

When you go to call your HVAC to get your tune-up, be sure that what you are getting is a comprehensive maintenance program. In other words, do a bit of research before you buy or agree to a contract/service visit. What you don’t want is to only receive service for one or a few items on the list you see above. Also be sure that you are contacting a qualified, trained technician.

In the end, it really isn’t just about safety—although that should be a compelling reason, too—but it is about preventative maintenance.

HVAC maintenance northern kentucky

Maintaining your heating and cooling system will help you combat unwanted costs and avoidable system failures. Of course calling for your fall tune-up is a vital step, where we come and check the gas or oil connections, your gas pressure, burner combustion and heat exchanger, and much more, to make sure you stay comfortable year-round.

Change Your Filters

When your furnace is forced to “work harder” to pull the air through, the more it will cost you, so be sure to replace your furnace filters on a monthly basis (or as your qualified HVAC professional tells you to do, depending on the climate where you live and your system).

Check the Fireplace

Have a professional check your chimney, clean when needed, and make sure the fireplace is working as it should.

Take a Look at Your Furnace!

Make sure nothing is near the furnace that shouldn’t be, such as something that could be flammable. Give the furnace a dust if it looks like it needs one!

Ask us About Sealing & Insulating

With winter around the corner, ask us about our recommendatinos for how you can insulate and seal air leaks. Whether those air leaks be in the attic, basement, a crawlspace, or around your windows and doors, you will notice the difference with these spaces taken care of.

Check That Your Carbon Monoxide Detector is Working

When you go to change out your air filter, just add one more thing to your list—checking the CO Detector. Yes, your furnace inspection is important to make sure your heat exchanger is not leaking, and a CO Detector is not meant to replace a tune-up, but this is a safety precaution to consider.

Regular System Checkups

You knew this had to be on the list! Regular maintenance is what you must do to make sure your furnace will run optimally, and when you need it most. This will save you money due to reduced energy requirements, keep you comfortable, and keep your intake pipe clear.

Look Outside the Home

Depending in your system, you may need to look at the exhaust and intake pipes that are on the exterior part of your home. Ask us for more information, but you want to make sure the area around these pipes are clean from debris.

When You Have a Programmable Thermostat…Use it!

Being able to control your energy means you can better control your bill each month, as well as have a better sense of the demands you are putting on your system over time. Ask us if you have more questions about how to find comfort using a programmable thermostat. During your tune-up, we will ensure your thermostat is working as it should.